TSARIN TSAFTA ULTRASONIC TAREDA

Barka da zuwa gidan yanar gizon hukuma na Tense, babban kamfani na musamman a cikin ƙira da rarraba kayan aikin tsaftacewa na ultrasonic.Tare da fiye da shekaru 15 na gwaninta a cikin wannan filin, Tense ya kasance yana nufin ko da yaushe gamsar da ingancin sadaukarwa tare da abokan cinikinmu, yana ba su sakamako mafi kyau.Tun da muka buɗe kofofin mu a cikin 2005, muna kan gaba na amfani da sabbin fasahohi. a duk faɗin ƙasar Sin, yana ba da sakamako mafi kyau tare da kayan aikin mu na ultrasonic.

{TS-UD200}

1) Ikon PLC, duk sigogin aiki da bayanan kuskure za a iya bincika da sauri da saita su;
2) Tsarin dumama mai hankali yana da yanayin aiki guda biyu, ana amfani da yanayin yau da kullun don sarrafa zafin jiki ta atomatik yayin aikin aiki na kayan aiki, ɗayan kuma shine yanayin alƙawari, wanda zai iya fahimtar alƙawarin dumama akan ƙayyadadden kwanan wata don saduwa da bukatun mutum. ;
3) Ana amfani da na'urar hawan pneumatic don kayan don shiga ta atomatik da fita daga tankin aikin tsaftacewa, kuma a lokaci guda gane motsi sama da ƙasa na abubuwa yayin aikin tsaftacewa, don haka inganta aikin tsaftacewa;
4) An sanye shi da na'urar raba ruwan mai, bayan kowane aikin tsaftacewa, kunna wannan aikin don cire man da ke yawo a saman ruwan tsaftacewa, ta yadda za a rage gurɓataccen gurɓataccen mai na biyu zuwa sassa;
5) Sanye take da kariya matakin ruwa da aikin jiko na atomatik;
6) An shigar da transducer na ultrasonic a cikin tanki mai tsaftacewa a cikin nau'i na akwatin girgiza, wanda ba kawai sauƙaƙe kulawa da sauyawa a cikin lokaci na gaba ba, amma kuma yana rage sautin raƙuman ruwa na ultrasonic.
7) An shigar da auduga mai rufi a bangon waje na tanki mai tsaftacewa don adana zafi na jikin tanki, kuma yana taimakawa wajen rage amo;
8) Kayan aiki suna sanye take da simintin gyare-gyare da gyare-gyare a kwance wanda za'a iya motsawa cikin sauƙi
9) Duk sassan injin tsaftacewa a cikin hulɗa da ruwa an yi su ne daga kayan SUS304.
10) Muna amfani da 3 * 380V don samar da wutar lantarki na al'ada na kayan aiki, kuma muna goyan bayan gyare-gyaren sauran kayan wuta daban-daban, kamar 3 * 220V, da dai sauransu.
Da fatan za a kula da shi lokacin yin odar kayan aiki.Duk sassan injin wanki da ke hulɗa da ruwa an yi su ne da kayan SUS304.

1) Kafin yin amfani da aikin dumama alƙawari, ya kamata a daidaita lokacin don dacewa da lokacin gida ta hanyar allon taɓawa;
2) Tabbatar cewa abubuwan tsaftacewa ba su wuce girman da aka yarda da nauyin kayan aiki ba;
3) A lokacin aikin tsaftacewa, tabbatar da cewa tushen iska na waje yana da al'ada;
4) Zaɓin wakili mai tsaftacewa ya kamata ya gamsar da 7≦Ph≦13;
5) Ana amfani da na'ura mai motsi na kayan aiki kawai don canja wuri lokacin da jikin tanki ya ɓace, kuma ba za a iya amfani dashi akai-akai don canja wurin kayan aiki ba lokacin da akwai kaya.

{fim}

A tsauri ultrasonic tsaftacewa inji dogara ne a kan fadada sanyi na talakawa trough ultrasonic, sabõda haka, afareta iya kammala cikakken tsaftacewa mafi sauƙi da kuma dace.Kayan aiki sun dace da tsaftacewa na gyaran injiniya, akwatin gearbox da supercharger sassa na sake gyarawa da tsarin kulawa;Har ila yau, ya dace da tsaftacewa na wasu sassan mota, sassan bawul, sassan hydraulic da sassan jirgin sama bayan sarrafawa.Kayan aiki sun dace sosai don docking tare da wasu kayan aiki na atomatik, don saduwa da bukatun tsaftacewa ta kan layi, kuma ana iya haɗa shi tare da kayan aiki da yawa don cimma tsabtace layin taro.